EUC

5.UAG Integration with the Horizon Cloud Services Console

On your ControlCenter server
- Open your Site 1 Chrome browser
  - select the WS1 Cloud Console shortcut
    - https://console.cloud.vmware.com

In the Console services login page
- under Email address
  - enter your assigned login username
  - select NEXT

In the Cloud Services page
- in the password area
  - enter Pa$$w0rd
  - select SIGN IN

In the Cloud Services page
- under Workspace ONE Cloud
  - select LAUNCH SERVICE

In the Workspace ONE Cloud Console
- In the My Workspace area
  - below Services
    - Horizon Cloud area
      - select LAUNCH

In the Horizon Universal Console
- In the Menu pane
  - expand Resources
    - select Capacity

In the Capacity area
- on the Horizon Edges tab
  - note, that Unified Access Gateway is Not Configured
- in line with Edge-Seattle,
  - select Not Configured

In the Configure Unified Access Gateway window
- under Load Balancer
  - next to Name
    - enter uag-hzn-avi02
  - next to FQDN or IP address
    - enter 172.16.50.100
      - select SAVE

In the Add Unified Access Gateway window
- below Gateways
  - select ADD
    - next to Name
      - enter uag-hzn-02a
    - next Management Endpoint
      - enter uag-hzn-02a.techseals.co
    - next to Username
      - enter admin
    - next to Password
      - enter Pa$$w0rd
        
        select SAVE

In the Add Unified Access Gateway window
- below Gateways
  - select ADD
    - next to Name
      - enter uag-hzn-02b
    - next Management Endpoint
      - enter uag-hzn-02b.techseals.co
    - next to Username
      - enter admin
    - next to Password
      - enter Pa$$w0rd
        
        select SAVE

In the Gateways window
- periodically select REFRESH
  - wait until the Status shows Ready for both UAG servers

In the Horizon Universal Console
- In the left Menu
  - below Resources
    - select Capacity

In the Capacity window
- on the Horizon Edges tab
  - in line with Edge-BLR
    - note, that Unified Access Gateway is Not Configured
- select Not Configured

In the Configure Unified Access Gateway window
- under Load Balancer
  - next to Name
    - enter uag-hzn-avi01
  - next to FQDN or IP address
    - enter 172.16.20.100
      - select SAVE

In the Add Unified Access Gateway window
- below Gateways
  - select ADD
    - next to Name
      - enter uag-hzn-01a
    - next Management Endpoint
      - enter uag-hzn-01a.techseals.co
    - next to Username
      - enter admin
    - next to Password
      - enter Pa$$w0rd
        
        select SAVE

In the Add Unified Access Gateway window
- below Gateways
  - select ADD
    - next to Name
      - enter uag-hzn-01b
    - next Management Endpoint
      - enter uag-hzn-01b.techseals.co
    - next to Username
      - enter admin
    - next to Password
      - enter Pa$$w0rd
        
        select SAVE

In the Gateways window
- periodically select REFRESH
  - wait until the Status shows Ready for both UAG servers

0 Comments

Add your comment